Home
1
Hot News
2
Application articles / Other
3
Full color three-dimensional ceiling / full color neon light / full color PU light / full color LED strip / wireless full color LED control / color neon light / customized LED flexible strip light4
https://www.prodigital.com.tw/en/ Prodigital Technology Corp.
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C.
This time we introduce the performance of fully-filled LED soft strip lights. The original LED step lights used sleeved LED soft strip lights and LED glue strip lights. These two models are known in the industry as having an IP65 rating, but this approach is not recommended for use in outdoor engineering cases or LED landscape cases. Difference description: A.LED sleeve soft strip lights are actually composed of bare board + silicone sleeve, achieving dustproof and waterproof. 1. When the LED is hit by a frontal impact, the silicone sleeve is soft and does not protect the internal LED. 2. The inlet end of the casing must be properly protected to avoid water intrusion due to pulling and rupture after construction. 3. When the waterproofing of the on-site wiring is poor, water or moisture will penetrate the copper wire's cooling and heating effects, causing siphonage and water intrusion. B. LED glue strip lights are covered with a layer of PU glue on the exposed LED board to achieve dustproof and waterproof on the front. 1. The main disadvantage of the LED flexible strip light is that the back is not waterproof Outdoor lighting mainly depends on the quality of the product itself + the quality of on-site construction to extend its service life. Factory customization Recommended length: DC24V length 20 meters double-ended power supply, DC12V length 10 meters double-ended power supply Color temperature range: 2700K ~ 6500K Power range: 5W ~15W/meter, single row Waterproof level: IP68 Outlet method: 2 wire length < 10 meters Leave a waterproof layer on the front and back of the PCBA LED soft board, and tightly cover the LED and soft board. The wires are also wrapped in adhesive material, and the outer layer has a heat-shrinkable sleeve to enhance waterproofing and reduce the pulling force that may cause the adhesive material to break. After learning about the product, go to the construction site to see actual performance. Removing glue from lamp power wiring hole cover Clear the original LED glue strip lights and LED tube soft strip lights operations, Site bonding requires silicone to reinforce waterproofing Use a scraper to remove it and it will almost become crispy! Removing old silicone takes a lot of time!! Take out the arrangement position of LED soft strip lights Peel off the 3M adhesive on the back and press along the edges to fix it! After pressing, apply glue to the power hole. The 3M adhesive tape is only for temporary fixation. In actuality, the upper and lower edges of the LED flexible strip lights and the joints with the wall must be firmly covered with a layer of glue to prevent them from falling off. Fixed completed appearance Actual effect at night   LED soft strip light products https://www.prodigital.com.tw/en/product_cg257608.html Introduction to various types of LED soft strip lights  https://www.prodigital.com.tw/en/hot_362663.html https://www.prodigital.com.tw/en/hot_471661.html Taiwan Hsinchu Community Landscape LED Step Light LED Outdoor Full Glue-filled Soft Strip Light Construction Case 2024-06-27 2025-06-27
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/en/hot_471661.html
Prodigital Technology Corp. 12F, No.358 Chung Hwa road, Chu pei city, Hsin chu county, Taiwan R.O.C. https://www.prodigital.com.tw/en/hot_471661.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2024-06-27 http://schema.org/InStock TWD 0 https://www.prodigital.com.tw/en/hot_471661.html
Hot News
others
Home Hot News Application articles / Other Full color three-dimensional ceiling / full color neon light / full color PU light / full color LED strip / wireless full color LED control / color neon light / customized LED flexible strip light

This time introduces the full-color flexible strip light with the ceiling

Full color LED strip light

Complete case photo

Description:

Because of the purchase of high-end audio equipment in the customer's home, he discussed the ceiling shape with the master carpenter, so we have the opportunity to take the case.

When I started to take over, I couldn’t see the shape on the floor plan.

Flexible strip light three-dimensional ceiling

The woodworker informed that it is easier to understand the on-site discussion, and explained that the wire pre-embedded for the lighting configuration should be provided first.Flexible strip light three-dimensional ceiling

3D ceiling with flexible strip lights

Flexible strip light three-dimensional ceiling

After discussion, confirm the construction time of the lamp and confirm the size of the shape after the soil is filled and painted.3D ceiling with flexible strip lights

The green circle represents the position of the control and power supply, and the others are LED light bars.3D ceiling with flexible strip lights

After following the instructions of the master carpenter, we marked the dimensions on the floor plan and photos for confirmation.

In addition, it is recommended that the woodworker completely exit the site and replace the full-color LED application. Avoid dust and soil filling and painting on the site.

The LED strip needs to be cleaned a second time after application.

3D ceiling with flexible strip lights 2.4G Controller and power

Power and control pre-work3D ceiling with flexible strip lights install

Put into the tube groove to compare~3D ceiling with flexible strip lights install

During the construction, it is necessary to remove the back decoration and make up the soil, and the glue on the back of the LED is fixed and fixed to avoid changes in the color selection.IMG_4049

The LED flexible strip light adopts a four-wire system, red/green/blue/common positive control, that is, all colors change simultaneously.3D ceiling with flexible strip lights Testing

Photos in progress3D ceiling with flexible strip lights install

When encountering a special angle, it is strictly forbidden to fold the LED in half to avoid breaking the solder joints/pins. Be sure to save 5 cm before turning.

The ㄇ type solid is only suitable for the form of a tube on the surface of the LED. Do not use this ㄇ type to apply excessive force to the surface of the LED.

3D ceiling with flexible strip lights Testing  3D ceiling with flexible strip lights Testing

3D ceiling with flexible strip lights Testing  3D ceiling with flexible strip lights Testing

3D ceiling with flexible strip lights Testing

3D ceiling with flexible strip lights Testing

Change test~3D ceiling with flexible strip lights 2.4G Controller and power

Indirect lamp homing3D ceiling with flexible strip lights

Finally, wipe the dirty spots accidentally during the application with a damp cloth, and take the garbage away, and the completion is smooth.
Video appreciation~

Questions are welcome~自訂樣式素材

Previous Back to List Next